Don’t you love running a GoPro to capture all those incredible moments riding with your friends? Unfortunately, you may face some difficulty in capturing those thrilling outdoor activities as it is pretty risky to hold your camera all the time while riding.
The most acceptable solution for this issue is to use a GoPro camera. You need a helmet mount, set up it on your helmet surface, and then attach the GoPro to it.
However, first, you need to know gopro dirt bike helmet mount. So here, we will mention step-by-step How To Mount A Gopro On Dirt Bike Helmet under the visor. You can also check out the best dirt bike helmets under 200 that are compatible with the Gopro mount.
Table of Contents
How To Mount A Gopro On Dirt Bike Helmet

Step 1
First of all, you will use a curved adhesive dirt bike helmet gopro mount to your helmet just as an extra safety step. Then, you will apply another layer of adhesive to the edge on both sides to provide a little bit more surface area for the adhesive to come in contact with the helmet, depending on the curve of your helmet.
In this step, you will usually take flat adhesive, cut little strips out, and apply these to the edge. To cut the flat adhesive, you can use a razor blade.
So you have already made the incisions. Now, you will start to peel off the adhesive that you need to use. It may take some time and will require you to stretch a lot just to get it off.
After getting the two extra pieces of adhesive, you will apply them to your curved GoPro mount for dirt bike helmet. Again, perfectionism isn’t required because it is just an extra safety step.
Next, you will apply the thin strips of adhesive to the edge of your curved mount. By using these strips, you create a thicker area towards the edge of your curved mount. This is going to add a little bit more surface area and contact with the helmet.
It is an optional step. Just use your own judgment and look at how curved your helmet actually is. If you feel the need to do it, you can do this extra step of safety to ensure that you’re getting the most contact area with the adhesive.
Step 2
Now, use the adhesive that you just created. You are going to apply it under our visor on this flat surface of your helmet. Make sure that it is clean and you’re doing this in a relatively warm area.
If necessary, you can use a blow-dryer or a heat gun to slightly warm up the surface of either the adhesive or the helmet, or both. Afterward, take the adhesive, line it up centered in the helmet, and press down evenly for the adhesive to stick.
Make sure you get it as straight as possible that looks good. Then you will press down the adhesive and make sure that you get the entire adhesive to stick all the way down.
So you have gotten your mount on correctly, and there should not be too much gap. You have created as much surface area sticking to the helmet as possible. So, you have successfully mounted the curved mount under your visor.
Step 3
The next step of how to put a GoPro mount on a helmet is installing your GoPro to the helmet. It is essential to recognize that GoPro offers different sizes in their mammals. They have small, medium, and large versions.
Installing the GoPro is simple. All you need to do now is correctly position the GoPro to the correct angle. It will aid you in getting the best frame and the best footage.
Some Bonus Tips!
So, you have already learned how to attach a GoPro to a dirt bike helmet. Here we are mentioning some bonus steps to make the process more effective.
Keep It In A Perfect Position
Always maintain the horizon within sight and the frame. You want to position the GoPro in not too neither high nor too low. Once you have correctly positioned your GoPro, take a sharpie and make a mark or make a scratch into the mount so that you know what position you need to be at to get the best frame.
You may also like to read:
- Can You Wear A Dirt Bike Helmet On The Street?
- How much does a dirt bike helmet cost?
- How to draw a dirt bike helmet?
Use Trick For Instant Recording
You may face some difficulty accessing the top button or the record button on your GoPro after mounting your GoPro under the visor. You will either have to turn the GoPro down to start recording or use the voice control to tell GoPro to start recording or stop recording, depending on your visor setup.
Trim The Helmet Plastic
To fit your GoPro under the visor on the helmet, you can trim the piece of plastic where the screw holes. Take the visor off, and then either with a pair of scissors or a pair of dikes, just trim off about a quarter inch. This allows you to fit the mount with a little bit of extra space.
Best Spot On A Helmet To Mount A Gopro Camera
You can either mount a GoPro camera at the top, side, or chin area.
Front or Top Mount
Some people are more curious about knowing how to mount GoPro to front of helmet. You will have multiple benefits using top mount. The best advantage is that your camera will be free from the effect of vibration while riding your bike.
However, too much head movement or excessive bike speed may affect yours over video quality. But it is the best position to capture moments for people who are close to you.
Side Mount
You will get incredible footage by keeping your GoPro on one side of your camera. It also allows you to track down of side moments due to low-profile positions. When you can set up your camera on the chin area, it is a great alternative too.
However, the position is not the best if your headgear is too big. In addition, the possibility exists that it will affect the pneumatics.
Chin Mount
If you want to capture precise point-of-view moments, the chin area is a great option to consider. Unlike top or side areas, you will get the most flexibility to capture video in wider and lower areas. But you want to make sure there is minimal head movement and your helmet is compatible to set up a chin mount.
Wrapping Up
Haven’t you still learned it? If you are doing outdoor activities, no other option is as better as using a helmet mount to take videos. All the moments can be captured much more easily with these devices. So, how to mount a GoPro to a dirt bike helmet? Hopefully, you have learned everything on this top from this article. Thanks for reading!